How to Get Rid Of Humidity

Home, Household 0 comments

How to Get Rid Of Humidity

Overview

The dampness can transform our home into an uncomfortable and especially insane place to live. An excess of humidity, coupled with poor ventilation and a host of bad habits can turn our house into an awkward place for its inhabitants.

The arrival of the rains, especially in wet seasons (autumn and winter) usually brings with it moisture problems, especially in homes that are not well ventilated.

Humidity at home usually appear in the form of stains caused by mold, unpleasant odors, condensation of water on walls and windows or in a more imperceptible way but it is not less dangerous for health.

The excess of humidity in the environment causes consumption in heating shoots up. This is to obtain a good thermal sensation at home. To do so, we need to increase the temperature of the air, which means that, in an environment with a high degree of humidity, more energy is needed to reach the desired temperature.

To invest to eliminate the humidity in house supposes a saving in the cost of heating until 30%!

Humidity problems arise only when there is an excess of humidity in the environment. The usual degree of relative humidity in the U.S.A is between 60 and 80%, depending on the areas. The important thing is that the humidity level of the interior of the house does not exceed the outside level in large quantities.

If you see cracks in the walls, these could be the cause of moisture through filtration. Sometimes these cracks are caused by defects in the construction of the house, a poor waterproofing or leaks in the plumbing system.

If you notice that water droplets form on the walls or around the windows, they are most likely caused by condensation. Humidity is present in all houses in one way or another.

Along with using products to eliminate mold and moisture, it is important that we ventilate the areas to eradicate fungi and avoid odors. The humidity of the house is a problem that can be generated by the impact of the climate and the lack of ventilation of the spaces.

Health Problems Due to Mold & Mildew

It is uncomfortable and harmful to health, as it can facilitate the development of mold and, in turn, create the right conditions for the proliferation of mites, dust, and bad smell. As a result, unsightly stains are formed on the walls and corners and, with the passage of time, can cause allergies and difficulties in the respiratory system. The painting loses its original tone and the structures deteriorate noticeably.
Molds and mildews can cause allergic reactions, asthma and more health problems in the habitats of the house.

Best Ways to Get Rid of Humidity

Here are some natural treatments that can help in reducing humidity.

  • Avoid covering the humidity

In the effort to disguise the moisture stains that form on the walls, some people place furniture and other items on the affected area. The problem is, this prevents the circulation of air and, since the mold is retained, its proliferation is favored.

Thus, the most convenient thing is to separate the furniture at a considerable distance, ensuring that there is enough space for proper ventilation.

  • Sodium bicarbonate

One more economic alternatives to eliminate the smell and moisture stains of the house is baking soda. This ingredient is not aggressive, has antibacterial and antifungal properties and has a great capacity for absorption.

White vinegar for the humidity of the house

White vinegar is one of the natural products. This is excellent for cleaning mold and moisture inside the home. It can be used for walls, bathtubs, clothes and certain corners of the kitchen. In fact, although its smell is not entirely pleasant, it is the best solution to eliminate the bad smell of humidity inside the cabinets.

Ingredients

A ½ cup of white vinegar (125 ml)

A ¼ cup of water (62 ml)

1 bottle with atomizer.

  • Sea salt

Sea salt is a natural ingredient that can help us to eliminate humidity in closed spaces. This disinfects, neutralizes strong odors and prevents the formation of dark mold spots. Put sea salt in small containers or bags, take them inside the closet and change them once a month.

  • Borax

Borax has special antibacterial properties that help in many ways to keep your home clean and dry. It is good to know that it is also a great solution against mold.

Be sure to use gloves to manipulate borax and dilute one tablespoon in two liters of water.

Then, apply it on the affected areas with a brush. Let it sit for half an hour and remove excess moisture with a clean cloth.

  • Open the windows

Opening the windows is a very simple action to avoid the accumulation of mold, mites and other impurities. The air that circulates helps to dry naturally and alters the environment that fungi and bacteria need to develop.  That’s why we need to ventilate the house.  It would help us to get rid of the unpleasant odors that are retained inside.

  • Keep an Eye on the Kitchen

Always use the extractor, cover the pots and pans when we cook and close the kitchen door.

  • Take Care of the Bathroom

Aerate the bathroom very well after showering to eliminate the condensation generated by the hot water. To clean after the shower the crystals and mirrors; If you want to do it quickly, dry them with absorbent paper wipes. Use the heating continuously, because the hot air absorbs more moisture and prevents sudden changes in temperature.

Home Maintenance vs. Home Repair

Our advice to prevent dampness is that you try to get your house or the space affected by humidity well ventilated, letting the air circulate through all the rooms and avoid as much as possible the humidity in the environment. Do not forget to ventilate cabinets and closed areas frequently.

If, despite following these tips, you can’t remove the humidity at home, consult with specialists. Home maintenance can’t give that perfect touch that a proper home repair for humidity affected areas can do. Also, home maintenance can protect humidity, but if your place is already badly affected, then a professional home repair is your only option to get rid of this problem. It will locate the origin of the dampness and will make a budget to permanently remove the humidity from your house.

Author Ana