This article will show you how to make a bird feeder with waste material.
You don’t need to spend a lot of money to create bird feeders at home, and this is something that can be done out of leftovers.
Feeding birds in your yard is not only an enjoyable experience but also helps keep them away from our houses! How does it work?
How to make a bird feeder with waste material
Contents
How to Make Bird Feeder with Old Boot
You can make a bird feeder out of old boots, pins, and a hammer.
This tutorial will show you how to make a bird feeder out of old boots. The most important equipment includes:
- A hammer
- A few pins
- A pair of the old boots
If you’re about to dispose of a pair of old boots, consider upcycling them into a bird feeder. All you need to do is follow these steps:
- Use a hammer to secure the boot in place.
- Fill it with birdseed.
- The birds should be able to sit comfortably as they eat from a perch.
So, if you have any old boots lying around or some pins and a hammer, consider turning them into a bird feeder!
How to Make Bird Feeder with Toilet Roll
If you want to make a bird feeder with a toilet roll, follow our tutorial. The most important equipment includes:
- Toilet roll
- Peanut butter
- Birdseed
If you want to make a bird feeder using waste material, consider using a toilet roll and some peanut butter. All you need to do is follow these steps:
1. Spread the exterior of the toilet roll with peanut butter. Ensure that you cover the entire roll, so the birds won’t be able to pull it off.
2. Roll the toilet paper roll in birdseed until it’s completely coated with seeds and peanut butter. This ensures that the peanut butter will adhere to the roll and prevents waste material from falling off as well.
3. Place on a flat surface and ensure that it’s not placed next to anything the birds might get into (such as a window or hanging plant).
4. Ensure that there is enough room for several birds to eat at the same time – larger feeders will attract more birds.
So, if you’re looking for waste material bird feeder ideas, consider using a toilet roll and some peanut butter.
It’s simple, easy to make, and waste material you would otherwise be throwing away!
How to Make Bird Feeder with Orange Peel
You can make a bird feeder from orange peel.
This tutorial will show you how to make a bird feeder from orange peel.
You don’t need to spend a lot of money to create bird feeders at home, and this is something that can be done out of leftovers.
How does it work? To begin with, cut an orange in half, then proceed to extract the whole meat.
You’ll now need to insert a piece of string into the orange.
Then, use an ice-cream scoop to extract the meat from inside.
Once most of it is out, you can easily attach peanut butter and birdseed directly onto the outside of the orange.
If you want to make a bird feeder from orange peel, follow these steps:
- Cut an orange in half.
- Insert string into the orange.
- Use ice-cream scoop to extract meat from inside.
- Attach peanut butter and birdseed directly onto the outside of the orange. This can be done by smearing a thin layer of peanut butter on the exterior of the orange, then applying birdseed.
- Ensure that there is enough room for several birds to eat at the same time – larger feeders will attract more birds.
So, if you have any oranges lying around, consider turning them into a bird feeder!
How to Make Bird Feeder with Plastic Bottle
You need a pair of scissors/Knife, glue, straw/Wooden chopsticks/Pencil, and marker.
If you’re looking for a way to recycle plastic bottles, consider upcycling them into bird feeders!
How does it work? This is what you’ll need:
- A pair of scissors or a knife
- Glue
- A straw or some wooden chopsticks
- Marker and pencil
All you’ll need to do is follow the steps we’ve outlined below:
1. Draw circles on each side of the bottle, then cut them out with scissors. This will create a cylindrical opening where your birds can sit comfortably while eating from the feeder.
2. Draw a triangle on one side of the bottle, then cut it out with scissors. This will create a long opening that your birds can use to get food from inside the plastic bottle.
3. Cut off or remove the cap from your bottle and glue it in place at one end of the cylindrical opening.
4. Insert the bottom of your straw or chopsticks into the bottle near one end, then secure them in place with glue on the inside of the plastic bottle. This will help to stabilize things and prevent your bird feeder from tipping over.
5. Cut a piece of string that’s long enough to reach from one side of the plastic bottle to the other.
6. Apply glue around the cylindrical opening, then attach your string on top of it and press down firmly for a few seconds while the adhesive dries. This will allow you to attach ingredients that birds can eat.
7. Make two holes on each side of your plastic bottle using a knife or similar implements.
8. Run the string through one hole, then tie it to the straw or chopsticks on the other side of your plastic bottle.
9. Fill up your bird feeder with ingredients that birds will eat, such as watermelon rinds, bits of fruit and vegetables, seed husks, nectar, or sugar water.
10. Hang your bird feeder in an area where you’ll frequently observe birds throughout the day.
Eventually, after several weeks, you should begin to notice that there are fewer ingredients inside of your bird feeder than when you first filled it up.
That’s because many birds will have used it as a source of food!
Also Read: How to Get Rid of Mockingbirds Naturally
Conclusion
The birds are always tweeting about you, which can be very relaxing.
But when winter arrives and the landscape is covered in white powder, it becomes a bleak time of year for finding food.
Making a bird feeder out of household rubbish would make the birds happy because they could enjoy themselves throughout the year.
This may also have benefits for yourself – you get to spend more time outside!